|
|
It is this "M88" the splendid Emurat of the PC-88 series. It is wonderful finish that PC-8001/MkIISR corresponds only as for no PC-88 it. If the person played in old times, should suck out BIOS with the game no matter how it is troublesome though it is necessary to make to the image.
|
 |
Need:
・M88
・PC88 BIOS
N88.rom
FONT.rom
・PC80
N80.rom
・Game Image
ROM File
Decompression
software（Zip）
|
Directory:
\M88
\M88
\M88
\Anywhere |
 |
1.First of all,downloads the main body of M88 file from official HP.
2.Because the main body of compressed by "lzh" form, it defrosts with free
software etc. that can defrost lzh.
3.folder name is assumed to be "M88", and BIOS sucked out from a main body file and a real each machine is put together as shown in a left chart.
At least necessary for start BIOS ･･･
N88.ROM, KANJI1.ROM ,FONT.ROM.
By the way, a left chart is ROM sucked out from PC88FA. )
- When the preparation to here ends, let's finally start up "M88". |
 |
4.The execution file in chart is started by double-clicking.
|
 |
5.If the screen in left chart comes out, it is a start success.
Please the error must go out when ROM from a real machine is insufficient, and firmly suck out and put it on this folder.
6.Please specify the number of files as they are, and push Enter when you want to
use Basic.
|
| 4.Read media made an image. |
|
Read Disk Image
Read Tape Image
 |
Disk image ROM (.d88 format).
7.From among the item on the left of the start screen of M88...
"Disk" →"Drive 1..." is chosen, and game ROM(.d88) made an image is read.
(When it is necessary to set the second piece, set it in "Drive 2...". )
Tape image ROM (.t88 format).
8.From among the item on the left of the start screen of M88 ･･･
"Tools" →"Tape..." is chosen, and sucking out tape image (.t88) is read from a real tape.
|
Start Disk Image
Start Tape Image |
9.From among the item on the left of the M88 start screen ･･･
"Control"→"Reset" then the floppy disk is automatically read when reactivating with .
10.When file No. is put in "How many files(0-15) ?", 'Enter' is pushed, the reading file name is put after F1 key (load"), it bundles by double quotation ("), and 'Enter' is pushed, the tape is read.
*By the way, each mode in the item of "Control" ･･･.
(N88-V1, V2, N, N80, and N80-V2 etc.)Attention of there is thing that doesn't move if it is neither it is nor
proper mode. Moreover, 4/8Mhz is switched about the operation clock of
"Control" →"Configure" →"CPU" according to a real machine of BIOS sucked out. (8Mhz since 88FH. )
|
Beautiful w/Even No. line display!!
|
|
| EMU NAVI |
|
|
|
|
|
| Vote&Ranking |
Which one
you like??
Vote for it!!
Monthly Ranking |
| AFFILIATE |
|
|
|
|
