|
The Power PC of Mac is Emulated. Having accomplished it though it was a thing not thought about ahead was this "PearPC" for a moment. It is a wonderful emulator that can test enough when it is an atmosphere and software confirmations etc. though the speed doesn't go out at all ofcourse. It explains the start sticking to Windows to the end by using ControlPanel though it sees with various HP if it is a setting with DOS. I will explain one not good at DOS in order as manage to be understood.
|
|
Need:
・PearPC
・PearPC_
Control
Panel
・HD image file
3/6gb Bz2'ed
Image
・Mac OS
X
10.3
Panther
Decompression
software
|
Directory:
\pearpc
c\Program Files
\PearPC_
ControlPanel
\pearpc
\pearpc
\Anywhere |
1)PearPC itself
2)PearPC Control Panel
3)HD image(formatted)
4)MacOSX10.3 Panther
*explains here by using MacOSX10.3(Panther). The setting might be somewhat
different for other MacOS X. |
1.First of all,downloads the main body of PearPC file from official HP.
(It is "Win32 jitc" of the under line.)
2.PearPC Control Panel is downloaded from official HP. (It is the first high "Compiled Binary" and OK. )It installs it by the method of installing usual.
3.The hard disk(formatted) is downloaded from official HP. 3GB and 6GB
can be selected according to capacity. If it is 3GB, "3gb Bz2' ed Image "It selects, and 6GB
"6gb Bz2 'Ed Image" is selected.
4.MacOSX is bought, and any writing software is acceptable, the image file
of installation CD is made. (The extension makes ".iso")
Example:Disc1 is assumed and "osx1.iso" and Disc2 are assumed to be "osx2.iso".
When the above-mentioned thing becomes complete, it puts it defrosting with each decompression software, and making "Pearpc" folder. ↓
|
Main screen of Control Panel
5.ControlPanel in a left chart opens by
"Start" →"All programs" →"PearPC Control Panel" →PearPC Control Panel.
6.The button of the red circle of figure below is pushed,the configuration
file new "Ppc.cfg" is made. ↓
|
7.First of all,selects the place of PearPC.
It is display Location of PearPC as for passing to ppc.exe. ↓
8.Select place and memory size of the HD image. Changes into "HardDrive", and the memory is assumed to be lowest "128MB".
9.It skips since 8, the place (in the pearpc folder) where name ("ppc.cfg") of the configuration file and the configuration file are put at the end is decided, and "Finish" is pushed.
10.If the check is put in CD-ROM that exists under the main screen at the
end, and the place of "osx1.iso" is selected with the Browse button on side, it is OK.
|
|
11.It formed in "Pearpc" folder, and "ppc.cfg" file
will be opened with the note pad and delete the 13th line (reversed character in a left chart) because it doesn't start when it is
the state as it is saying that "There is an error in the 13th row"
because it goes out even if you start).
12.(the 15th row "Key_change_cd_0 =" none ") is deleted, the superscription is
preserved in similar, and it shuts.
The confirmation item ・・・
It is confirmed whether there is neatly an item such as
pci_ide0_master_image ="Path to the HD"
pci_ide0_slave_image ="Path to the OS"
prom_bootmethod ="select".
*The configuration file is confirmed again because it is displayed that there is an error in the line how many like "Error line (figure)" in case of not being neatly. |
4.Prepare for the installation. |
|
PPC loader screen
|
13.When a left screen comes out, it is a start success.
It is under the first to select "1. partition 9 of'cdrom0'" of the figure below, and the installation begins when "1" is put in the item of "Your choice(ESC abort): 0", and 'Enter' is pushed because it becomes a start from the installation disk "osx1.iso".
Detail of the left screen.↓
|
Let's Start installation!! |
|
EMU NAVI |
|
|
|
Vote&Ranking |
Which one
you like??
Vote for it!!
Monthly Ranking |
AFFILIATE |
|
|
|