|
T-tune that evolved emulator X Millennium that X1 is wonderful. The emulator
of ika Tune and X1 that evolved T-tune that became tape correspondence
further keeps evolving. There is a wonderful emu that moves with DOS named
other X1EMU, too and I will explain by "X Mil T+ika" sticking
to Windows here. By all means because there is a thing with a wonderful
even only disk though the start confirmation of the tape version was not
able to be done due to my power shortage. |
|
Need:
・Xmil T+ika
・X1 image file
ROM file
Decompression software(Zip)
|
Directory:
\X1
\Anywhere |
|
1.First of all,downloads the main body of Xmillennium T-tune+ikaTune file from
official HP.
2.Because the main body of compressed by "Zip" form, it defrosts
with free software etc. that can defrost zip.
3.folder name is assumed to be "X1", and the main body file is
confirmed as shown in a left chart.
It is BIOS file for this emu, and because IPL-ROM is mounted, it is not necessary to suck it out from a real machine. However, we will recommend the thing sucked out because it thinks that interchangeability or more rises if there is BIOS file sucked out from a real machine. Please put BIOS in the same folder as the execution file when sucking it out.
- When the preparation to here ends, let's finally start up "Xmil".
|
|
4.The execution file in left chart is started by double-clicking. |
|
5.If the screen in left chart comes out, it is a start success.
6.Starts to use Basic when Hu-BASIC and db-BASIC, etc. are selected from "FDD 0", and reactivation is put by
"Emulate" →"IPL Reset".
By the way, it can enjoy an image that is more beautiful than X1 real machine
by removing "Other" →"SkipLine" check.
|
Read Disk Image
Read Tape Image
|
Disk image(.2D/.D88/.88D/.d8u)
7.From among the item on the left of the Xmil start screen ・・・
"FDD-0" →"Open" is chosen, and game ROM(2d/D88/88D/d8u) made an image is read. When it
is necessary to set the second piece,sets it in "FDD-1" on the side.
Tape image ROM(. tap format)
8.From among the item on the left of the Xmil start screen ・・・
"CMT" →"OPEN" is chosen, and sucking out tape image (.tap) is read from a real tape.
Apology:The confirmation was not able to be taken because it had not recognized it in my tape image of reserves.
|
Start Disk Image |
9.From among the item on the left of the Xmil start screen ・・・
"Emulate" →"IPL Reset". The floppy disk is automatically read when reactivating. |
Demo of X1c works really fine!! |
|
EMU NAVI |
|
|
|
Vote&Ranking |
Which one
you like??
Vote for it!!
Monthly Ranking |
AFFILIATE |
|
|
|