|
|
I think the thing that "Feelings good" impression is very seen though it takes time because it becomes the work of touch to "Mac OS X" actually here ahead. I think that about 2 to 3 hour hangs lowest in a minimum installation. It was 20 hours when having installed it full and it borrowed from my personal computer (1GB of Pen3) by the way at the time given up if it was usual. We will recommend an advanced beyond this by have the machine power thing.
|
| You should know at least... |
|
 |
Key Config:
・Mouse U/N
・Fullscreen
・Force ending
・Other Appli. |
Windows PC:
・F12
・Alt+Enter
・Alt+Shift+Ctrl
・Alt-Tab |
Install starting screen.
|
1.It doesn't finish also cooling the impression of the Apple mark, and "Mac OS X" image...
← left chart comes out.
2.language is set.
"Use English for the main language" is selected, and "Keep" button is pushed. ↓
 |
3.Select OS install Volume.
Select formatted HD
|
3.Installation ahead volume selection.
If HD of the downloaded 3GB(The name is "Untitled") is displayed, the image of HD is clicked.
"Option" button below is pushed to install it after HD is formatted, the check is put on "After deletes it..." of the figure below, and the "OK" button is pushed to make sure.
↓
← It returns to a left screen, HD is selected, and the "OK" button is pushed.
|
| 3.Decide install contents. |
|
4.Custom install to HD
 |
4.Selects what you want to install in HD.If it wants to shorten the time of the installation, checks on the item other than "Indispensable system software" remove everything, and push "Installation" button.
Note: A full installation in the HD of 3GB is impossible. Let's prepare HD of 6GB if it installs it full.
It only waits after this until the installation ends.
|
| 4.Basic part installation |
|
Main screen of Control Panel
Main screen of Control Panel
 |
5.basic system part 1 is installed. It hangs during about 1 to 3 hour.
6.basic system part 2 is installed. It hangs during about 1 to 3 hour.
7.Hangs about 30min to hour until other system installations end.
*There is an difference by the performance of use PC for time.
After reactivation is pressed, PearPC is automatically ended when all the installations end.
|
| 5.Start from installed HD. |
|
PearPC Loading screen
 |
8.starts PearPC from ControlPanel again.
In that case, as shown in figure below if you want to install the second piece (osx2.iso) in installation disk.
It starts specifying osx2.iso for "Location of･･･" under ControlPanel.
9.When left chart goes out,
"Your choice(ESC abort):0" is made "2"
this time to start from the installed HD image, 'Enter' is pushed, and it starts.
|
| 6.Make a default setting. |
|
Start!!
 |
 |
 |
 |
 |
|
1.Welcome |
2.Basic Set |
3.Apple ID |
4.User Regist |
 |
 |
 |
 |
 |
| 5.User Regist |
6.Thankyou |
7.Make Acc. |
8.Net Set. |
9."OK" |
 |
 |
 |
 |
Finished!! |
| 10.Clock Set |
11.Day/Time |
12.Finish |
13.Open!! |
|
|
Too long to get here!! |
|
| EMU NAVI |
|
|
|
|
|
| Vote&Ranking |
Which one
you like??
Vote for it!!
Monthly Ranking |
| AFFILIATE |
|
|
|
|
